Home
Back to Pull Starts and Bearings
Nitro RC Clutch Roller Bearing 1/10 1/8 Upgrade kit for HPI Kyosho Thunder Tiger

Nitro RC Clutch Roller Bearing 1/10 1/8 Upgrade kit for HPI Kyosho Thunder Tiger

283918789647

£7.99

PayPal Heading

Qty

description

If you have tried to locate a replacement roller bearing for your clutch bell, you will know that they are almost impossible to find.

For that reason I have come up with a fix, which is actually better than the original roller bearing, providing less play, and lasting much longer.

This is a set of two flanged bearings which will fit exactly inside the bell housing, one pushed in from the top and one from the bottom.

I have a video that shows you how to do this. please visit the help and advice section of my website rcscrapyard.com

This fix will fit any engine that has an exposed style roller bearing, including HPI, Thunder Tiger and Kyosho. Some bell houses are fixed by a circlip and some with a screw. This will fit both types of bell housing.

Pictures are for illustration only. The bell housing and Roller bearing are not included in this sale. One set of two flanged bearings will be provided upon purchase.

It is compatible with most engines from the following manufacturers. If in doubt, please send me a picture of your bell housing, and I will confirm.

Traxxas, HPI, Protech, Thunder Tiger, HSP, VX, Himoto, Kyosho, Flying Point, Haiboxing, Acme, Turnigy, CEN, Losi, Smartech, XTM, Team Associated, Redcat, Duratrax, Silverline, Tamiya, FTX, and many more...... If unsure - please ask!