This is a complete kit for converting an RC Scrapyard Marauder 1/10 scale vehicle, fitted with a 540 motor, to a completely brushless setup. The kit includes everthing you will need including an ESC, and a 540 size 4300KV Brushless Motor.
If you are new to Brushless motors, and would like to understand what the numbers mean, please refer to my free guide to Brushless Motors, available in the downloads section of this web site.
1. 4 poles 12 slots high torque motor design.
2. High purity copper windings for maximum efficiency.
3. Precision design for maximum energy (BHP) conversion.
4. Precision balanced rotor for ultra smooth running, and maximum RPM
5. ESC Multiple Protection: Low voltage cut-off protection, over-heat protection, throttle signal loss protection.
6. Built-in 5.8V / 3A BEC.
7. Suitable for 1/10 scale RCScrapyard Marauder vehicle
8. This is a high quality item, and is fully recyclable.
550 3.175mm Specifications:
Max voltage: 12V
Max amps: 100A
Max power(W): 1200W
Item weight: 230g
Item size: 56 * 36mm
Idle current: 3.7A
Max RPM: 50K
Length of extend shaft: 17mm
Connector: 4mm banana plug
ESC (Electronic Speed Controller) Specification:
Constant Current: 60A
Burst Current: 320A
Battery: 2-3S Li-Po / 4-9S Ni-MH / Ni-Cd
BEC Output: 5.8V / 3A
Power Supply Plug: T Plug Male
Motor Plug: 4mm Banana Plug Female
Size: 50*35*34mm/2*1.4*1.3in (Without cable)
1 x 550-4300KV Motor
1 x 60Amp Waterproof Programmable ESC
1 x ESC and Motor Manual
*Note - If you also require a Lipo battery, please search for item 7.4V Lipo Battery (using the search bar above)