63bbc9ff05a15174cdda1662472bf392 (1).png
 
 
RCS-Racing-Performance-BLACK-eng.png
 
63bbc9ff05a15174cdda1662472bf392 (2).png
RCS-Racing-Performance-BLACK-eng.png
 
 
 

Nitro engine Air filter. 1/8th RC Waterproof. Extra Fine Foam,- Black with Filter Oil

285587841853

£11.99

PayPal Heading

Qty
Made using two sliding tubes, this is a high quality semi waterproof air filter suitable for all 1/8th scale Nitro engines. It contains both coarse and fine foam, to ensure the engine air is good quality.
This is obviously not totally waterproof as the engine still needs to breathe, but it is ideal for running through puddles, or on the beach etc.
This filter has two foam elements. The outer element filters heavy dust particles and larger debris, whilst the inner foam is much finer and filters small particles ensuring you engine inhales clean air.

RCS Racing Air Filter Oil has been developed over many years of running Nitro Engines, and has been specially formulated to provide maximum dust protection for your engine while allowing it to breath normally, assuring full power without restriction. 

Many big brand Air filter oils are to thick and sticky in consistency which has the effect of choking the engine if too much is used. This oil has been designed with just the right viscosity to allow engines to breath properly, even if a little too much is used. 

When fitting a new air filter, or if you have washed your existing filter out with fuel, you will need to add some air filter oil to it to stop the fine particles of dust and grit damaging the engine. 

The bottle of oil is supplied in a resealable plastic bag. Use the bag to place your filter foam together with a few drops of oil. Close the bag, expelling any excess air, and then massage the oil into the foam.

.