If you are new to Brushless motors, and would like to understand what the numbers mean, please refer to my free guide to Brushless Motors, available in the downloads section of this web site.
1. 4 poles 12 slots high torque motor design.
2. High purity copper windings for maximum efficiency.
3. Precision design for maximum energy (BHP) conversion.
4. Precision balanced rotor for ultra smooth running, and maximum RPM
5. ESC Multiple Protection: Low voltage cut-off protection, over-heat protection, throttle signal loss protection.
6. Built-in 5.8V / 3A BEC.
7. Suitable for 1/10 scale RC Car / Truck / Buggy.
8. This is a high quality item, and is fully recyclable.
Condition: 100% Brand New
Material: ABS, Copper
Applicable Product: for 1/10 Scale RC Car
Waterproof : Yes
Maximum Voltage: < 15V
Maximum Amps: 62A
KV (RPM / Volt): 4370KV
Maximum RPM: 60000
Diameter: 36mm / 1.42inch
Length: 50mm / 1.97inch
Shaft Length: 15mm / 0.59inch
Shaft Diameter: 3.175mm / 0.125inch
Plug Type: 4mm Gold Banana Plug
ESC (Electronic Speed Controller) Specification:
Constant Current: 60A
Burst Current: 320A
Battery: 2-3S Li-Po / 4-9S Ni-MH / Ni-Cd
BEC Output: 5.8V / 3A
Power Supply Plug: T Plug Male
Motor Plug: 4mm Banana Plug Female
Size: 50*35*34mm/2*1.4*1.3in (Without cable)
1 x 3650-4370KV Motor
1 x 60Amp Waterproof Programmable ESC
1 x 6000mAh RCScrapyard 7.4V Lipo battery
1 x USB Lipo Battery Charger
1 x ESC Manual
*Note - If you also require a battery charger for the Lipo battery, please search for item number 284309715874 (using the search bar above) for the RCScrpayard fully intelligent multi operational battery charger, which is highly recomended for Lipo batteries. It is not possble to charge a Lipo battery with a standard Nicad or NiMih battery charger.